The Waves DigiGrid IOC Audio Interface is the 'Swiss Army Knife' of the DiGiGrid range, providing a multitude of valuable I/O capabilities (16 x AES I/O, 8-channel ADC/DAC, 1 x ADAT) needed either in the studio control room, or at the Front Of House position for a system running Waves eMotion LV1. Make sure that you leave a place for the IOC in your DiGiGrid system!
The Waves DigiGrid IOC Control Room I/O Audio Interface is perfect for the control room. With the Waves DigiGrid IOC and a dedicated SoundGrid DSP server on your network, you will be able to run up to hundreds of SoundGrid-compatible Waves and third-party plugins, all fully integrated within your DAW of choice. Just plug the Waves DigiGrid IOC into your SoundGrid network using a single Ethernet cable, and you will enter a new world of real-time tracking, mixing and monitoring, with extremely low latency of only 0.8 milliseconds. The Waves DigiGrid IOC Audio Interface offers a range of connectivity options, including 2 mic/line inputs with broadcast-grade preamps, 8 line inputs/outputs, and 16 AES and ADAT inputs/outputs, plus two powerful headphone outputs.
Waves DigiGrid IOC Audio Interface Features
- General Features
- ASIO- and Core Audio-compliant audio I/O for Native DAWs
- 2 Mic/line inputs with broadcast-grade preamps and 8 line inputs
- 8 Line outputs and 2 headphone outputs
- 16 AES ins/outs, ADAT ins/outs
- Connects via a single Ethernet cable (Cat 5e/Cat 6)
- Quick-view front panel metering
- High-definition 192 kHz ADC conversion
- Compatible with SuperRack, MultiRack, eMotion LV1, SoundGrid Studio
- Control Panel Features
- Clock settings: source, sample rate, type, status
- Mic preamp controls: input gains, phantom on/off
- Input and output meters
- Save and load presets of unit settings
- Save your settings along with your Waves and SoundGrid host application sessions
Waves DigiGrid IOC Audio Interface Specifications
- General:
- Line Inputs: 8 Line Inputs (25-Pin DB25)
- Line Outputs: 8 Line Outputs (25-Pin DB25)
- AES/EBU I/O: 16 AES/EBU I/O (25-Pin DB25)
- ADAT I/O: 1 ADAT I/O (8 Channels @ 48kHz). (4 Channels @ 96 kHz and 2 Channels @ 192 kHz will be Supported in the Future)
- Mic Inputs: 2 Mic Inputs (XLR/TRS Combo)
- SoundGrid Ports: 2 SoundGrid RJ45 Ethernet Ports
- Word Clock I/O: 1 Word Clock I/O
- AC Input: 1 AC Input
- Headphone Output: 2 Headphone Outputs with Analog Level Knobs
- Size: 1U Rack-Mounted
- Supported Sample Rates: 44.1, 48, 88.2 and 96 kHz (176.4 and 192 kHz will be Supported in the Future)
- Clock Synchronization: via Word Clock Input, AES/EBU, SoundGrid (SoE), Internal
- Reset Switch: Yes
- Multiple Broadcast Level Format Settings: Jumpers on All Analog I/Os
- Inputs:
- Mic Input Impedance: 2K5 Ohms
- Phantom Power: 48V
- Line Input Impedance: 8K0 Ohms
- Mic Gain Range: 0 dB to +52.5 dB in 7.5-dB Steps. Fine Control Provides an Additional 0dB to 7dB in 0.5-dB Steps
- Mic Maximum Input Level: +26dB
- Line Maximum Input Level: +36dB
- Mic Equivalent Input Noise: >-126dB (150 Ohm Source, Gain +59.5dB)
- Frequency Response: +/-0.5dB 20Hz to 20kHz
- Channel Separation: Better than 90dB (40Hz to 15kHz)
- Outputs:
- Maximum Line Output Level: +22dBu
- Residual Line Output Noise:
- Frequency Response: +/-0.5dB (20Hz to 20kHz)
- Line Output Impedance: 50 Ohms
- Channel Separation: Better than 90dB (40Hz to 15kHz)
- Harmonic Distortion: Typically <0.01% @ Unity Gain, -10dB input @ 1kHz.
- Dimensions:
- Width: 48.26 cm / 19 inches
- Height: 4.36 cm / 1U
- Depth: 35.6 cm / 14.01 inches
- Device Weight: 4.5 kg / 9.92 lbs
Waves DigiGrid IOC Audio Interface Software Components
- SoundGrid Studio Application – For managing the SoundGrid network on your host computer
- eMotion ST Mixer – Low-latency monitoring for tracking and rehearsing
- StudioRack – For running plugin chains, saving and loading their presets, and offloading their processing to a SoundGrid DSP server
- SoundGrid ASIO/Core Audio – Connects any DAW to the SoundGrid network as a software I/O
Waves DigiGrid IOC Audio Interface Includes
- 1 x Waves DigiGrid IOC Control Room I/O Audio Interface
- 1 x Power Cable
- 1 Year Warranty
1 Review Hide Reviews Show Reviews
-
Rock solid and versatile.
Feb 5th 2017Great piece of gear. It just works. IOC sounds great, and plays well with my mac AND pc... at the same time! I'm using as my FOH io box in an lv1 setup, as a dedicated monitor io in my studio rig, and as the main io in a simple mobile recording rig. Digigrid: To me, networked audio is the only way to go. Sound quality is great, the system is infinitely scalable, and it is scary fast. I'll never go back to fw, USB, or thunderbolt interfaces.