The Tascam MH-8 Headphone Amplifier is a professional quality rack-mountable headphone amplifier perfect for studio, stage and installation applications. With direct and shared inputs, individual level controls and daisy-chain capability, the MH-8 allows 8 listeners to monitor a variety of sources.
The Tascam MH-8 Headphone Amplifier is designed for studio, stage and installation. Each of the eight stereo outputs gets 250mW per side with three switchable sources available. Two stereo inputs can be shared to any of the outputs, and individual stereo direct inputs are available for each of the eight channels. A headphone out can select any one of these inputs, or mix several together. A set of foldback outputs allow you to chain other Tascam MH-8s into a system. For the ultimate in routing flexibility and power, nothing beats the Tascam MH-8 Headphone Amplifier.
Wide Range of Input Terminals that Support All Kinds of Inputs Sources
The Tascam MH-8 has a range stereo inputs that support various input sources; INPUT1 is equipped with XLR balanced and TRS balanced inputs, while INPUT 2 is equipped with XLR balanced and RCA-pin unbalanced inputs, and DIRECT INPUT from each headphone comes with TRS balanced inputs. The input jacks are also compatible with audio system of facilities, in-store audiovisual systems, and recording studio monitoring systems.
Tascam MH-8 Headphone Amplifier Features
- 8 Stereo 1/4" headphone outputs
- 250mW + 250mW at 32O per channel
- Each headphone output switchable to input 1, input 2 and direct input source (or a combination of the three)
- Master input gain controls
- 16 1/4" TRS balanced direct inputs
- 4 XLR balanced inputs (CH1 & CH2)
- 2 1/4" TRS balanced inputs (CH1)
- 2 RCA unbalanced inputs (CH2)
- 4 TRS balanced foldback outputs
- Ground lift switch and terminal
Tascam MH-8 Headphone Amplifier Specifications
- Audio Inputs/Outputs:
- INPUT 1 and 2:
- Connector: XLR-3-31 (1: GND, 2: HOT: 3: COLD) × 2 Pairs
- Input Impedance: 56kO
- Nominal Input Level: +4dBu (1.23mV)
- Maximum Input Level: +24dBu (12.3V)
- INPUT 1:
- Connector: 1/4" (6.3mm) TRS Phone Jack (Top: HOT, Ring: COLD, Sleeve: GND) × 1 Pairs
- Input Impedance: 56kO
- Nominal Input Level: +4dBu (1.23V)
- Maximum Input Level: +24dBu (12.3V)
- INPUT 2:
- Connector: RCA Pin Jack × 1 Pair
- Input Impedance: 22kO
- Nominal Input Level: –10dBu (0.3V)
- Maximum Input Level: +10dBu (3.16V)
- DIRECT INPUT:
- Connector: 1/4" (6.3mm) TRS Phone Jack (Top: HOT, Ring: COLD, Sleeve: GND) × 8 Pairs
- Input Impedance: 56kO
- Nominal Input Level: +4dBu (1.23V)
- Maximum Input Level: +24dBu (12.3V)
- FOLDBACK OUT:
- Connector: 1/4" (6.3mm) TRS Phone Jack (Top: HOT, Ring: COLD, Sleeve: GND) × 2 Pairs
- Input Impedance: 94kO
- Nominal Input Level: +4dBu (1.23V)
- Maximum Input Level: +24dBu (12.3V)
- PHONES OUT:
- Connector: 1/4" (6.3mm) Stereo Phone Jack × 8
- Maximum Output Level: 250mW + 250mW (32O)
- INPUT 1 and 2:
- Power: AC 100 - 240V, 50/60Hz
- Power Consumption: 36W
- Dimensions (W × H × D): 19.0" × 1.73" × 11.0" / 482 × 44 × 280 mm
- Weight: 8.4 lbs. / 3.8 kg
- Audio Performance:
- Frequency Response:
- PHONES Out: 20Hz to 50kHz/100mW, 32O ±3dB
- FOLDBACK Out: 10Hz to 100kHz ±3dB
- S/N Ratio:
- PHONES Out: 85dB or Greater (A-Weighted, 20kHz, LPF)
- FOLDBACK Out: 90dB or Greater (A-Weighted, 20kHz, LPF)
- THD:
- PHONES Out: 0.05% or Less (When Outputting 100mW + 100mW 32O, 20Hz HPF and 20kHz LPF)
- FOLDBACK Out: 0.07% or Less (20Hz HPF and 20kHz LPF)
- Channel Separation:
- PHONES Out: 50dB or Greater (Within a Channel, A-Weighted, 20kHz LPF, 1kHz Nominal Input and Output, 32O Termination)
- FOLDBACK Out: 90dB or Greater (A-Weighted, 20kHz LPF, 1kHz Nominal Input and Output, 600O Termination)
- Crosstalk:
- PHONES Out: 65dB or Greater (A-Weighted, 20kHz LPF, 1kHz Nominal Input and Output, 32O Termination)
- Frequency Response:
Tascam MH-8 Headphone Amplifier Includes
- 1 x Tascam MH-8 Headphone Amplifier
- 1 x Power Cord
- 1 x Rackmounting Screw Kit
- 1 x Owners Manual
- 1 Year Warranty
Sign Up for exclusive sales and offers!