SPL Performer S900 Power Amplifier (Red)

The SPL Performer S900 Power Amplifier marks the middle of the line and is based on the big SPL Performer s1200 stereo power amp in terms of the selection of components and conceptual design. This version features a red faceplate.

This is where sonic greatness meets performance specs that perfectly match high-resolution but not overly power-hungry speakers of any size. With an amplifier output of 2 x 370 W (4 Ω) [2 x 420 W (2 Ω); 2 x 200 W (8 Ω)], it truly has enough reserves to powerfully drive any loudspeaker. Despite its compact height, the Performer s900 stereo power amplifi er off ers exceptional headroom sourcing in the SPL VOLTAiR technology and impresses with a detail-rich, vivid, honest and musically outstanding sound.

The design – a matter of great taste
With its appearance, the SPL Performer s900 stereo power amplifi er fits perfectly into the SPL “Professional Fidelity” HiFi product line – and is of course available in the three basic colors black, red or silver.

A class of its own
Conventional solid-state power amplifi ers tend to operate in a critical range of the built-in components – this results in unpleasant harmonical artifacts. Tube power amplifiers also distort at their limit but their characteristical behaviour softens this roughness and harshness. Non the less this is a falsifi ed representation of the sound image. Thanks to VOLTAiR Technology, the Performer s900 can process much higher levels without even coming near to a critical range. All components constantly operate in the optimal range. The result is a very pleasant, natural and relaxed sound experience. Enjoy your music in every detail and without any listening fatigue.

Full power
The Performer s900 features individual amplification stages for voltage and power amplification, which ensures a perfect
operating of the class-AB amplifier circuit. Thanks to each stage’s own negative feed- back path, it is ruled out that feedbacks from the loudspeaker are interacting with the input stage – this way the SPL VOLTAiR Technology can play out its full performance.

Freedom of choice
The Performer s900 features a stereo pair of XLR and RCA inputs. This makes it compatible with all preamps on the market without the use of adapters. The stereo input can be selected via the Input Select switch on the rear panel.

Better safe than sorry
The Performer s900 has a protection circuit against DC voltage and against overheating. If direct current (DC) is detected, the output stage switches off automatically and the Protect LED lights up red. To protect the s900 against the unlikely event of overheating, a temperature sensor at the heatsinks continously monitors the temperature of the device. The TEMP LED lights up yellow when the Performer s900 is getting too hot. As a result of this the output stage is switched off and the fans run on high-speed until the device has cooled down.

VOLTAiR – 120V Rail Technology
VOLTAiR is the synonym for our 120 V Rail Technology within the Professional Fidelity series. The audio signals are processed with an unequalled +/- 60 V DC, which corresponds to twice that of discrete operational amplifi ers and four-times that of semiconductor operational amplifiers. VOLTAiR Technology reaches outstanding technical and sonic performances. Technically especially in terms of dynamic range and headroom and sonically especially in reproducing the finest details and delivering a totally relaxed sounding audio experience. Music sounds absolutely natural.

SPL Performer S900 Power Amplifier

• Analog inputs: XLR & RCA
  • Input sensitivity: 8 dBu
  • Input impedance: 20 kΩ
  • Common Mode Rejection: -82 dB
• Speaker output: Binding posts with ø4mm cable hole (screwable) and banana plug
  • Output power (RMS, 2 Ω ): 2 x 450 W
  • Harmonic distortion (1 kHz, 2 Ω ): 0.07 %
  • Output power (1 kHz, 4 Ω ): 2 x 370 W
  • Harmonic distortion (1 kHz, 4 Ω ): 0.06 %
  • Output power (1 kHz, 8 Ω ): 2 x 200 W
  • Harmonic distortion (1 kHz, 8 Ω ): 0.04 %
  • Output voltage (Peak-to-Peak): 112 V
  • Output voltage (RMS): 40.2 V
  • Output impedance (20 Hz - 20 Khz): < 0.035 Ω
  • Frequency range (-3 dB): 10 Hz – 80 kHz
  • Amplification Gain: 26 dB
  • Damping factor (1 kHz, 8 Ω): > 280
  • Noise (A-weighted): -123 dB
• Internal Linear Power Supply with Shielded Toroidal Transformer
  • Linear Power Supply with Toroidal Transformer: 866 VA
  • Operating voltage for analog audio: +/- 60 V
  • Operating voltage (peak to peak): +/- 63 V
  • Operating voltage for Relais and LEDs, AMP CTL: 12 V
• Mains Power Supply
  • Mains voltage (selectable, see fuse chamber): 230 V AC / 50 Hz
  • Fuse for 230: V T 4 A
  • Mains voltage (selectable, see fuse chamber): 115 V AC / 60 Hz
  • Fuse for 115 V: T 8 A
  • Power consumption: 900 VA
  • Stand-By Power Consumption: 20 VA
• Dimensions & Weight
  • Dimensions: 11 x 4.3 x 13.6 inch
  • Weight: 32.2 lbs

SPL Performer S900 Power Amplifier Includes

• SPL Performer S900 Power Amplifier
• Power Cable
• Manufacturer Warranty