The sE Electronics T2 Multi-Pattern Microphone is the ultimate combination of solid state performance and versatility. With a titanium diaphragm for the most immediate transients, the T2 delivers full and perfectly balanced mid and low frequencies, and is perfectly suited for all percussive sounds.
The sE Electronics T2 Multi-Pattern Microphone offers the versatility of the 4400a's shockmount, patterns, filters and pads, plus a titanium diaphragm for the most immediate transients you've ever heard. The T2 is the ultimate combination of solid state performance and versatility. Based on the chassis and feature spec of the acclaimed 4400a, but with the highly specialized capsule of the original sE Titan, the sE Electronics T2 delivers full and perfectly balanced mid and low frequencies, while its titanium capsule produces un-hyped but ultra-detailed HF response.
The sE Electronics T2 Microphone is thus ideally suited for percussive sounds, including drums, percussion, the attack of a guitar, hammer action on piano, kick drum, slap bass, and hip-hop vocals.
The Titanium Diaphragm
Unusually, the sE Electronics T2 features a hand-crafted titanium-sputtered capsule. This is much stiffer than our gold-sputtered capsules, meaning quicker transient response, which is important when recording instruments that create fast transients and attack - like drums and percussion - as it enables the microphone to maintain clarity and deliver exceptionally accurate performances. The stiffness of this special diaphragm also allows it to withstand extremely high sound pressure levels, so it can handle the loudest percussion with ease.
Custom Shockmount + Chassis
The sE Electronics T2 Microphone shares the shockmount of the 4400a. The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around and used flat against a drum head or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3/4" thick, the sE Electronics T2 fits neatly in the palm of your hand, but is built to take a beating on the road.
sE Electronics T2 Multi-Pattern Microphone Features
- The ultimate combination of solid state performance and versatility
- Titanium diaphragm for the most immediate transients
- Delivers full and perfectly balanced mid and low frequencies
- Ideally suited for drums, percussion, guitar, hammer action on piano, kick drum, slap bass, and hip-hop vocals
- Withstands extremely high sound pressure levels
- Flat, round-edged chassis design
- Custom suspension mount to keep the microphone from vibrations and in place
sE Electronics T2 Multi-Pattern Microphone Specifications
- Capsule Type: Hand-Crafted True Condenser
- Diaphragm: 32mm Twin Titanium/Mylar
- Directional Pattern: Cardioid, Hyper Cardioid, Omni, Figure-8
- Frequency Range: 20 Hz - 20 kHz
- Impedance: 50 Ohms
- Sensitivity: 25.12 mV/Pa (-32 dB)
- Max SPL: 122/132/142 dB (0/-10/-20 dB pad) (0.5% THD @ 1kHz)
- Signal to Noise Ratio: 78 dB
- Self Noise: 16 dB(A)
- Pass Filter Switch: 60/120 Hz
- Preattenuation Pad: -10/-20 dB
- Matching Connectors: XLR3F
- Power Requirement: 48V phantom
- Weight: 280g / 9.88oz
sE Electronics T2 Multi-Pattern Microphone Includes
- sE Electronics T2 Microphone
- Custom Suspension Mount
- Padded Carrying Case
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!