The Grace Design m908 Digilink Option Card provides 32 channels of I/O from a Pro Tools HDX or Pro Tools HD Native system.
The Grace Design m908 Digilink Option Card provides the additional 32 channels of I/O to your Grace Design m908 Monitor Controller. In ProTools Hardware Setup the only control that is active for the emulated HD I/Os is the Clock Source selection. Valid options are Internal and Word Clock. If choosing Word Clock select the option that is at the session sample rate. The m908 does not support Loop Sync. If the m908 is the only device connected to the HDX port then the Clock Source selection is only valid for the HD I/O #1. HD I/O #2 is internally synchronized inside the m908 Digilink card.
When using the m908 Digilink interface System Clock source or Input Clock Override should be set to "Digilink". When Word Clock is selected clock source in Pro|Tools Hardware Setup the m908 Digilink clock will switch to the Word Clock Input BNC connector on the ACU automatically. You do not need to change the m908 clock source to Wordclock. Although the m908 will appear as two HD I/O devices with 32 inputs these channels are not currently routable in the m908. The m908 Digilink interface is for monitoring outputs only at this time. Future m908 firmware will allow analog or digital inputs on the m908 to be routed to the Digilink interface.
Other digital interfacing options for the m908 Monitor Controller include the, Grace Design provides a Grace Design m908 Dante Option Card, and Grace Design m908 Ravenna Option Card.
Further there are two ADC cards for the m908 available to expand your Analog I/O to upto 16 inputs, utilizing the Grace Design m908 ADC-1 AD Card, and Grace Design m908 ADC-2 AD Card.
The M908 option cards (such as this Digilink Card) are installed at the factory, by Grace Design. So when you place your order for the m908, be sure to add to the cart the option card(s) you want, and Grace will install them in your m908 before shipping you the unit. If you already have the m908 and want to add one (or more) of these cards, you can purchase them individually from Front End Audio. It is recommended that you contact Grace Design to have them install the card in your existing unit, though they can provide you the instructions to install it yourself, if you prefer to do so and assume the risks.
Grace Design m908 Digilink Option Card Features
- 32-Channel of DigiLink
- Designed for use with the Grace Design m908 Monitor Controller
Grace Design m908 Dante Option Card Includes
- Grace Design m908 Dante Option Card
- Manufacturer's Warranty
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!