Focusrite RedNet AM2 Network Interface

Focusrite

(No reviews yet) Write a Review
Product Code: 9999-17276
$699.99
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Focusrite RedNet AM2 Network Interface is a compact, Power-over-Ethernet (PoE) -supplied stereo analogue output device for any Dante audio-over-IP network. Featuring a powerful headphone amp, capable of driving both high and low impedance headphones, RedNet AM2 is the ideal signal monitoring device to add extra functionality to your audio network.

The Focusrite RedNet AM2 Network Interface is housed in a compact metal case with microphone stand mount, and includes independent level controls for line (XLR) and headphone (1/4" TRS) outputs, and features superb monitor-quality conversion. The Focusrite RedNet AM2 can be powered over Ethernet (PoE) or via an external power supply (included) plugged into the rear.

A pair of rear-panel XLR outputs offers line level signals of up to 24dBu with top panel level control and mute switch, while the front panel 1/4" headphone output is capable of driving high signal levels perfect for monitoring in high-SPL environments. The bottom of the sturdy aluminium and steel chassis features a threaded mic stand boss allowing the Focusrite RedNet AM2 to be placed in any convenient location whether on a desk or at a performer's fingertips on a stand. Finally, the IEEE standard PoE input allows a single Ethernet cable to provide power, remote control, clocking and audio data to Focusrite RedNet AM2.

Focusrite RedNet AM2 Network Interface Features

  • Stereo line output and headphone for Dante audio-over-IP networks
  • Power-over-Ethernet supplied: IEEE 802.3af compliant
  • Up to 24-bit, 96kHz sampling rates
  • Robust steel and aluminium chassis
  • Powerful headphone output even with high-impedance headphones
  • Up to 24dBu line output levels
  • Independent level control of headphone and line outputs
  • Mute switch for line output
  • Mic stand mount
  • Kensington security slot
  • Integrated network switch allowing daisy-chaining of network devices

Focusrite RedNet AM2 Network Interface Specifications

  • Line Level Outputs:
    • 0 dBFS Reference Output Levels: 18 or 24dBu (Switchable)
    • Frequency Response Output: 20Hz - 20kHz ±0.05dB
    • THD N Output:
    • Dynamic Range: 120dB A-Weighted (Typical), 20Hz - 20kHz
  • Crosstalk:
    • Output to Output:
  • Headphone Output:
    • 0 dBFS Reference Levels Headphones: 19dBm
    • Headphone Frequency Response: 20Hz - 20kHz ±0.05dB
    • Headphone THD N:
    • Headphone Dynamic Range: 118dB A-Weighted (Typical), 20Hz - 20kHz
    • Output Impedance: 5 ohm
    • Headphone Impedance: 32 ohm - 600 ohm
  • Digital Performance:
    • Supported Sample Rates: 44.1 / 48 / 88.2 / 96 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 Bit
    • Clock Sources: Internal or from Dante Network Master
    • Minimum Latency: 1ms
  • Front Panel Connectivity:
    • Headphone Outputs: 1 x 1/4" Stereo Jack
    • Line Outputs: 2 x Male XLR
    • PSU (PoE and DC): 1 x PoE (Port 1) Input and 1 x DC 12V Barrel Input Connector
    • Network: Green LED (Indicates Device is Network Master or Network Slave, Shows Valid Network Lock
  • Rear Panel Connectivity:
    • Top Panel Indicators:
      • Power: LED Illuminates Green When PoE is Connected and Red When DC Power is Connected
      • Signal: Signal Indicator LED for Both Network Input Channels
      • Mute: Red LED
      • Control Functions: 2 x Pots
  • Dimensions & Weight:
    • Height (Chassis Only): 48mm/ 1.89"
    • Height (inc. Pots and Feet): 58mm/ 2.28"
    • Width: 140mm/ 5.51"
    • Depth (Chassis Only): 106.5mm/ 4.19"
    • Depth (inc. Connectors): 116mm/ 4.57"
    • Weight: 0.81kg
  • Power:
    • Power over Ethernet (PoE): Complies with IEEE 802.3af Class 0 Power-over-Ethernet Standard
    • DC Power Supply: 1 x 12V 1.2A DC Power Supply
    • Power Consumption: PoE: 11.0W - DC: 9.8W
    • Operating Temperature: Operates at Up to An Ambient Temperature of 50 Degrees Celcius

Focusrite RedNet AM2 Network Interface Includes

  • Focusrite RedNet AM2 Network Interface
  • DC Power Supply
  • Safety Information Cut Sheet
  • RedNet Getting Started Guide
  • Product Registration Card - Provides Links to:
    • RedNet Control
    • RedNet PCIe Drivers (Included with RedNet Control Download)
    • Audinate Dante Controller (Installed with RedNet Control)
  • 2 Year Warranty

No review yet, Be first to Write a Review