The Electro Voice ND96 Dynamic Microphone is a robust high-performance dynamic supercardioid vocal mic. Designed for excellent acoustic control on very loud stages, the ND96’s special structural and acoustical designs create performance characteristics allowing the microphone’s gain before feedback in a mix to be significantly louder than most microphones.
The Electro Voice ND96 Dynamic Microphone's dynamic capsule contains a large Mylar diaphragm which delivers a rich and detailed frequency response by combining its large surface area for tonal balance with its low-mass high-velocity material for exceptionally fast transient response.
The Electro Voice ND96 features a selectable vocal tuning that can be engaged to reduce certain low-mid frequency areas and emphasize key upper-midrange vocal presence areas to increase intelligibility in high energy reinforcement. The Electro Voice ND96 features an innovative capsule shock-mount system consisting of a 4-point suspension around the circumference of the capsule combined with a tuned pneumatic pump at the capsule base, offering superior handling noise reduction to eliminate mechanical vibrations and noise in the mix. The Electro Voice ND96 capsule uses a humbucking coil that attenuates AC hum and electromagnetic interference. ND dynamic mics can be used with confidence near speaker cabinets and EMF generating equipment racks. The Electro Voice ND96 Memraflex grille is made of a durable tightmesh grille wire that withstands extraordinarily-rough treatment. Your microphone remains protected and looking good gig-after-gig, year-after-year.
For additional protection, the Electro Voice ND96 capsule contains a hydrophobic cloth membrane which prevents moisture and debris from reaching the diaphragm.
Electro Voice ND96 Dynamic Microphone Features
- Push vocals through the mix - Structural and acoustical functions allow the signal to be pushed through incredibly loud ambient volumes without risking feedback
- Large-diaphragm dynamic capsule - Creates a rich and detailed frequency response
- Vocal presence emphasis switch - A selectable voice presence booster reduces certain low-mid frequency areas and emphasizes key upper-midrange vocal presence areas for a more profound vocal edge when driving the voice higher in the mix
- Shock-mounted capsule minimizes handling noise -Low frequency bumps and thumps won't get into the PA
- Humbucking coil guards against line hum - Use with confidence near speaker cabinets and EMF-generating equipment racks
- Memraflex grille resists denting - Durable tight-mesh grilles withstand extraordinarily rough treatment
Electro Voice ND96 Dynamic Microphone Specifications
- Audio Frequency Response: 140 - 15,000 Hz
- Case Material: Die Cast Zinc
- Connector Type: 3-Pin XLR
- Diameter (Max): 1.99" (50.5 mm)
- Element: Dynamic
- Finish: Black Polyurethane Paint
- Impedance, Low-Z Balanced: 350 O
- Maximum SPL: > 140 dB
- Mic Type: Handheld
- Open Circuit Voltage: 3.3 mV/Pascal
- Polar Pattern: Supercardioid
- Power Requirement: Passive
- Height: 6.69" (170 mm)
- Net Weight: 11.39 oz (323 g)
- Shipping Weight: 21.2 oz (601 g)
Electro Voice ND96 Dynamic Microphone Includes
- Electro Voice ND96 Dynamic Mic
- Microphone Stand Clip
- Euro Thread Adapter
- Gig Bag
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!