The DPA ST4011C Stereo Microphone Kit contains two matched, compact 4011C cardioid microphones capable of handling high SPLs without distortion. Along with accessories, the stereo pair included in the kit is perfectly tailored for close-miking applications.
The DPA ST4011C Stereo Microphone Kit consists of specially selected 4011C Cardioid Microphones which are matched within ±1 dB on both frequency response and sensitivity. The pair comes in a heavy-duty Peli™ Case for safe transportation and easy access to the microphones and accessories.
This stereo pair uses the MMC4011 Cardioid Microphone Capsule to gain its amazing sound. Designed to be hidden from view, the diminutive design and high performance of the 4011C Cardioid Microphone, Compact makes it the outstanding choice for unobtrusively miking all types of television, film, theatre, concert and studio performances.
When used to spot-mike larger orchestras, these mics are hard to beat. Capable of handling high SPLs without distortion, the DPA 4011C Cardioid Microphone, Compact is perfectly tailored for close-miking applications; minimizing bleed from other instruments. In film and TV studios, they are excellent for off-camera voice recording or Foley work. For live on-camera recordings, their matte black finish gives them a classic yet inconspicuous appearance, while for sound reinforcement in concert halls, theatres and houses of worship, they provide clean, natural sound while reducing the noticeable effect of lighting reflection.
DPA ST4011C Stereo Microphone Kit Features
- Excellent for both PA/Live and recording
- Carefully matched within ± 1 dB
- Low profile mounting options
- Heavy-duty Peli™ Case transportation and protection
DPA ST4011C Stereo Microphone Kit Specifications
- Directional Pattern: Wide Cardioid
- Principle of Operation: Pressure Gradient
- Cartridge Type: Pre-Polarized Condenser
- Frequency Response: 20 Hz - 20 kHz
- Effective Frequency Range, ±2 dB, at 60 cm (23.6 in): 40 Hz - 20 kHz
- Sensitivity, Nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
- Equivalent Noise Level, A-Weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
- Equivalent Noise Level, ITU-R BS.468-4: Typ. 25 dB
- Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL Peak
- Dynamic Range: Typ. 121 dB
- Max. SPL, THD 10%: 152 dB SPL Peak
- Rated Output Impedance: 100 O
- Minimum Load Impedance: 2 kO
- Cable Drive Capability: 100 m (328 ft)
- Output Balance Principle: Impedance balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): > 50 dB
- Power Supply (for Full Performance): P48 (Phantom Power)
- Current Consumption: 2.8 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Color: Matte black
- Weight: 58 g (2 oz)
- Microphone Diameter: 19 mm (0.75 in)
- Capsule Diameter: 19 mm (0.75 in)
- Microphone Length: 64 mm (2.5 in)
- Maximum Output Voltage, RMS: > 4 V
- Polarity: +V at Pin 2 for Positive Sound Pressure
- Temperature Range: -40°C to 45°C (-40°F to 113°F)
- Relative Humidity (RH): Up to 90%
- Matching Tolerance (Frequency Response and Sensitivity): ±1 dB
- Phase Deviation for Kit: < 10°
DPA ST4011C Stereo Microphone Kit Includes
- 2 x DPA 4011C Cardioid Microphones (Matched Pair)
- 2 x Microphone Clips
- 2 x Microphone Windscreens
- 1 x Peli™ Case
- 5 Year Warranty
Sign Up for exclusive sales and offers!