The DPA ST2006A Stereo Microphone Kit contains two handpicked omni microphones for delivering the precise acoustic fingerprint and true tone. Perfect for orchestra, acoustic piano, guitar, wind instruments and choirs recording applications!
The DPA ST2006A Stereo Microphone Kit consists of the wide and versatile pencil mic series legendary in the high-end recording and film production industry. Delivering clean, accurate sound, the included matched stereo pair of 2006A Twin Diaphragm Omnidirectional Microphone is used by professionals, who understand sound and insist on only using the best.
Inside the MMC2006 Twin Diaphragm Omnidirectional Capsule, two opposite-facing miniature capsules are custom rebuilt. They are placed into a double-diaphragm, one-capsule composition. This combines the advantages of small capsules with the lower inherent noise achieved from a larger diaphragm area. These capsules provide fast impulse response and large frequency bandwidth. The capsules are loaded to DPA's supreme recording mic series preamplifiers instead of the tiny miniature FET ones. This gives the sound more air and precision. Together with the MMP-A preamp, this condenser mic bridges the gap between the extreme sound quality of DPA's recording mic series and theirr well-known miniature mic series.
DPA ST2006A Stereo Microphone Kit Features
- Modularity – interchangable capsules and preamplifiers
- Up to 120 dB dynamic range
- RF rejection between >60 and >40 dB
- Linear frequency response
- High SPL
- Superior gain before feedback
DPA ST2006A Stereo Microphone Kit Specifications
- Directional Pattern: Omnidirectional
- Principle of Operation: Pressure
- Cartridge Type: Pre-polarized Condenser, Twin Diaphragm Capsule
- Frequency Response: 20 Hz - 20 kHz
- Effective Frequency Range ±2 dB: 50 Hz - 20 kHz with typ. 3 dB Soft Boost at 14 kHz
- Sensitivity, Nominal, ±2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
- Equivalent Noise Level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
- Equivalent Noise Level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
- Distortion, THD < 1%: 127 dB SPL RMS, 130 dB SPL Peak
- Dynamic Range: Typ. 114 dB
- Max. SPL, THD 10%: 146 dB SPL Peak
- Switchable Attenuator, Filters etc.: 0 dB / -20 dB
- Rated Output Impedance: 200 O
- Minimum Load Impedance: 2 kO
- Cable Drive Capability: 100 m (328 ft)
- Output Balance Principle: Impedance Balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): > 60 dB
- Power Supply (for Full Performance): P48 (Phantom Power)
- Current Consumption: 2.8 mA
- Connector: XLR-3M. Pin 1: Shield, Pin 2: Signal + Phase, Pin 3: - Phase
- Color: Matte Black
- Weight: 160 g (5.6 oz)
- Microphone Diameter: 19 mm (0.75 in)
- Microphone Length: 164 mm (6.5 in)
- Maximum Output Voltage, RMS: 8 V
- Polarity: +V at Pin 2 for Positive Sound Pressure
- Temperature Range: -40°C to 45°C (-40°F to 113°F)
- Relative Humidity (RH): Up to 90%
- Sensitivity Selection Tolerance (at 1 kHz): ±1.5 dB
DPA ST2006A Stereo Microphone Kit Includes
- 2 x DPA 2006A Omnidirectional Microphones
- 2 x Microphone Holders
- 2 x Windscreens
- 1 x Peli™ Case
- 2 Year Warranty
Sign Up for exclusive sales and offers!