The DPA 5006A Surround Microphone Kit includes five DPA 4006A omnidirectional mics, carefully factory-matched for natural sound. With high sensitivity, low noise-floor and extremely linear frequency response, it is a perfect choice for all AB Stereo, Decca Tree or surround main array recordings.
The DPA 5006A Surround Microphone Kit contains five DPA 4006A Omnidirectional Microphones with natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB). The DPA 4006A Omnidirectional Microphones are the perfect choice for all AB Stereo, Decca Tree or surround main array recordings. The precise reproduction, total transparency and natural-sounding clarity of 4006A Omnidirectional Microphones will provide you with a lifetime of satisfying listening.
The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone / accessory inlays.
DPA 5006A Surround Microphone Kit Features
- Five carefully matched microphones
- Useful as orchestral main pair
- Peli™ Case transportation and protection
DPA 5006A Surround Microphone Kit Specifications
- DPA 4006A Omnidirectional Microphone:
- Directional Pattern: Omnidirectional
- Principle of Operation: Pressure
- Cartridge Type: Pre-Polarized Condenser
- Frequency Response: 10 Hz - 20 kHz
- Effective Frequency Range ±2 dB: 10 Hz - 20 kHz
- Sensitivity, Nominal, ±2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
- Equivalent Noise Level, A-Weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
- Equivalent Noise Level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
- Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL Peak
- Dynamic Range: Typ. 124 dB
- Max. SPL, THD 10%: 146 dB SPL Peak
- Switchable Attenuator, Filters etc.: 0 dB / -20 dB
- Rated Output Impedance: 200 O
- Minimum Load Impedance: 2 kO
- Cable Drive Capability: 100 m (328 ft)
- Output Balance Principle: Impedance Balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): > 60 dB
- Power Supply (for Full Performance): P48 (Phantom Power)
- Current Consumption: 2.8 mA
- Connector: XLR-3M. Pin 1: Shield, Pin 2: Signal + Phase, Pin 3: - Phase
- Color: Matte Black
- Weight: 163 g (5.7 oz)
- Microphone Diameter: 16 - 19 mm (0.6 - 0.75 in)
- Capsule Diameter: 16 mm (0.6 in)
- Microphone Length: 170 mm (6.7 in)
- Maximum Output Voltage, RMS: 8.0 V
- Polarity: +V at pin 2 for Positive Sound Pressure
- Temperature Range: -40°C to 45°C (-40°F to 113°F)
- Relative Humidity (RH): Up to 90 %
- Matching Tolerance (Frequency Response and Sensitivity): ±0.5 dB
- Phase Deviation for Kit: < 5°
DPA 5006A Surround Microphone Kit Includes
- 5 x DPA 4006A Omnidirectional Microphones
- 1 x Diffuse-field Grid
- 1 x Close-miking Grid
- 1 x Free-field Grid
- 5 x Microphone Clips
- 5 x Foam Windscreens
- 1 x Peli Case
- 5 Year Warranty