The Cranborne Audio N22H Audio Distribution System is a reference-grade headphone amplifier with advanced C.A.S.T. cable management, battery power, and switchable power modes.
The N22H is a headphone amp that can be deployed exactly where it is needed - right beside the musician. Using our C.A.S.T. system, N22H can be connected on the end of a 100m (330ft) shielded Cat 5e, Cat 6, and Cat 7 cable and deliver a headphone mix directly to the musician during tracking.
Standalone Reference-Quality Amplification
Based on the same custom design found in the renowned 500R8 interface, N22H’s headphone amplifier achieves a flat Frequency Response from 0.8Hz to above 250kHz and ultra-low distortion (0.0009% THD+N, 100 kOhm load) allowing it to power headphones with clean, transparent power during critical listening, mixing, and mastering.
Cranborne Audio N22H Audio Distribution System Features
- Two balanced combi jack inputs
- Two balanced XLR and 1/4” jack outputs
- Reference-quality headphone amplifier
- THD+N: <0.0009% (-100.4dB) @ +6dBu, 1kHz, A-weighted, 100 kOhm load
- Output Wattage (1kHz): 252mW x 2 @ 600 ohms, 502mW x 2 @ 220 ohms, 950mW x 2 @ 100 ohms, 470mW x 2 @ 32 ohms
- Frequency Response: 1dB, 200kHz
- Switchable High and Low Power Modes
- High Power optimised for maximum power and performance for high-impedance, over-ear, and open back mixing/mastering headphones
- Low Power optimised for maximum battery life for low-impedance, in-ears and closed back tracking headphones
- 9V Battery compartment
- Up to ~10 hours battery life (Low Power Mode)
- Up to ~2 hours Battery life (High Power Mode)
- 9V DC Power Inlet
- Includes a 9V DC (centre negative) power supply
- Can be powered with any 3rd party 9v DC (centre negative) guitar pedal power supply (1000mA supply recommended)
- C.A.S.T IN RRTT Port
- For connecting to the C.A.S.T. Output of N22 or other C.A.S.T. enabled devices
- C.A.S.T OUT TTRR Port
- For connecting to the C.A.S.T. Input of 500R8, 500ADAT or other C.A.S.T. enabled devices
- Cat5 snake connectivity with N22 or second N22H
- Compatible with any shielded Cat 5e/Cat 6/Cat 7 cable with distances up to 100m/330ft
- Improved crosstalk performance with high-performance Cat 6 and Cat 7 (recommended)
- Ruggedised metal enclosure
- Fixing holes for permanent installation
- Cable-tie holes for cable management
- Non-slip rubber feet
- ⅜” mic stand thread mount on bottom
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!