The Audio Technica ATM350UcW Instrument Microphone is an exceptional cardioid condenser mic designed to clip to brass, upright bass, reeds, piano, snare, toms, and violin. Supplied with Audio-Technica's versatile UniMount clip and new violin mount, the ATM350UcW offers a crisp, clear, well-balanced response, even at high SPLs.
The Audio Technica ATM350UcW Instrument Microphone features low-profile design for minimum visibility. This Cardioid Condenser Clip-on Instrument Microphone comes with a less power module. 55” (1.4 m) permanently attached miniature cable terminated with a locking 4-pin connector for use with Audio-Technica cW-style body-pack transmitters.
Audio Technica ATM350UcW Instrument Microphone Features
- Low-profile design for minimum visibility
- UniMount clip permits accurate positioning, provides shock resistance and protects element
- Unique violin mount permits unobtrusive placement of microphone between the instrument's bridge and tailpiece
- Crisp, clear, well-balanced response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Interchangeable elements available for hypercardioid and omnidirectional polar patterns
- Rugged, all-metal design and construction for years of trouble-free use
Audio Technica ATM350UcW Instrument Microphone Specifications
- Element: Fixed-Charge Back Plate Permanently Polarized Condenser
- Polar Pattern: Cardioid
- Frequency Response: 40-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
- Open Circuit Sensitivity: 49 dB (3.5 mV) re 1V at 1 Pa
- Impedance: 50 Ohms
- Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (Typical): 122 dB, 1 kHz at Max SPL
- Signal-To -Noise Ratio: 67 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 3.5 mA Typical
- Switch: Flat, Roll-Off
- Weight (Microphone): 14.5 g (0.5 oz)
- Dimensions (Microphones): 37.8 mm (1.49") Long, 12.2 mm (0.48") Diameter
- Output Connector / Cable: 55" Cable Terminated for Use with UniPak Transmitter
- Audio-Technica Case Style: M36
Audio Technica ATM350UcW Instrument Microphone Includes
- Audio Technica ATM350UcW Instrument Microphone
- Audio Technica AT8418 UniMount Microphone Instrument Mount
- Audio Technica AT8468 Violin Mount
- Soft Protective Pouch
- 2 Year Warranty
Special Note
The Audio Technica ATM350UcW is designed for use with wireless belt-pack transmitters and does not ship with the AT8542 power module. So, you will receive the ATM350 high-intensity cardioid condenser clip-on instrument microphone only, with 55" cable terminated for use with UniPak transmitter. Also, includes AT8418 clip-on instrument mount and AT8468 violin mount.
No review yet, Be first to Write a Review