The Audio Technica AT4041SP Studio Microphone Pack offers two AT4041 studio condenser microphones, engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. With low-mass diaphragm, transformerless circuitry and state-of-the-art design, this pair is ideal for drum overheads, acoustic guitar, piano, horns and under snare.
The Audio Technica AT4041SP Studio Microphone Pack combines two AT4041 Microphones, a unique combination of audio excellence and moderate cost. The Audio Technica AT4041 features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.
Audio Technica AT4041SP Studio Microphone Pack Features
- Smooth, extended frequency response with a slight rise occurring in the high-frequency region
- Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
- Switchable hi-pass filter and rugged turned-brass microphone housing
Audio Technica AT4041SP Studio Microphone Pack Specifications
- Element: Fixed-Charge Back Plate, Permanently Polarized Condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
- Open Circuit Sensitivity: -36 dB (15.8 mV), re 1V at 1 Pa
- Impedance: 100 Ohms
- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% THD
- Dynamic Range (Typical): 121 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 70 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 48V DC, 3.2 mA Typical
- Switch: Flat, Roll-Off
- Weight: 4.2 oz (120 g)
- Dimensions: 6.28" (159.5 mm) Long, 0.83" (21.0 mm) Body Diameter
- Output Connector: Integral 3-Pin XLRM-Type
- Audio-Technica Case Style: S1
Audio Technica AT4041SP Studio Microphone Pack Includes
- 2 x Audio Technica AT4041 Studio Microphones
- 2 x Audio Technica AT8405a Stand Clamp for 5/8"-27 Threaded Stands
- 2 x Audio Technica AT8159 Windscreen
- 1 x Protective Wooden Storage Case
- 2 Year Warranty
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!