The ART CleanBox II Hum Eliminator is designed to remove ground loops without any signal degradation.
The ART CleanBox II Hum Eliminator helps you achieve a pristine signal without any loop effect. The safest way to eliminate unwanted noise is with the ART CleanBOX II. “Hum” in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called “ground loops”. The ART CleanBOX II easily removes ground loops without any signal degradation.
ART CleanBox II Hum Eliminator Features
- The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer’s ground, then into a mixer’s power ground
- The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit
- The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second guitar amp’s power ground
- The ART CleanBOX II easily removes ground loops without any signal degradation
ART CleanBox II Hum Eliminator Specifications
- Frequency Response: 10Hz – 50kHz, +/- .5dB @ +4dBu
- THD: .01% Typical @ 1kHz, +18dBu, <.05% @ 100Hz, +24 dBu
- Insertion Loss: .4dB @ 100kOhm Load, 5.5dB @ 600Ohm Load
- Connections: 1/4” TRS balanced/unbalanced jacks
- Power: Passive
- Dimensions: 4.5 x 2.875 x 1.5 inches (114mm x 73mm x 38mm)
- Weight: .9 lbs (.4kg)
ART CleanBox II Hum Eliminator Includes
- ART CleanBox II Hum Eliminator
- Owners Manual
- 3 Year Warranty
Sign Up for exclusive sales and offers!