The Guzauski-Swist GS3A Monitoring System will flat-out change your life. No other monitoring system provides the accuracy of audio replication in a clinical presentation, while also being simultaneously exciting and inspiring to everyone in the room. Take advantage of a fully open DSP system for the ability to tweak the response to compensate for room acoustic deficiencies. If you're serious about your work, the Guzauski-Swist GS3A Monitoring System is the monitoring system to trust.
The Guzauski-Swist GS3A Stereo Monitoring System is a 3-way studio monitor system designed for professionals to completely take the punishment of a tracking or writing session as well as provide the extreme accuracy and translation required for mixing. "No compromises." That's the Guzauski-Swist motto. The GS3A's are both perfect examples of quality craftsmanship and over 40 years of research and development. The monitors consists of the finest state-of-the-art components currently available. Delivering accurate full bandwidth frequency response and wide dynamic capability are hallmarks of this system. The GS3A's innovative design minimizes ear fatigue while delivering superb sonic accuracy for near-field or mid-field monitoring.
Guzauski-Swist GSA3i AmplifierProduces over 3.5 kilowatts per stereo pair. The Class D power amplifier circuits utilized are approximately 85% efficient and produce much less heat than older Class AB circuit designs. You could roast a pig on the heat sinks required on an AB amplifier producing similar power output as the Guzauski-Swist GSA3 Amplifier Module. The DSP Processing Module is a primary component to the GS4A System delivering the end user a high degree of room frequency compensation through its front end. The Guzauski-Swist “GS DSP” software application gives your computer user an option to control the unit from a remote PC. The Guzauski-Swist DSP “GS DSP”, software application is designed to easily control and monitor the Guzauski-Swist DSP control module device, allowing the user to get the whole picture on one screen. Programs can be recalled and stored from and to your PCʼs hard drive, thus expanding the storage to become virtually limitless. The Guzauski-Swist DSP “GS DSP” comes with a wide array of presets configured for precise integration into the acoustical environment in which it is installed.
Guzauski-Swist GS3A Monitoring System Features
- 12″ low resonance, long excursion driver in a sealed cabinet eliminating port turbulence noise
- 3″ Dome ATC mid range capable of high power handing and extended bandwidth which keeps the vocal frequency range away from crossover points
- 1″ Morel Soft dome Tweeter known for smooth and extended frequency response with exceptional power handling
- 3700 Watts of class D amplification in a separate rack chassis
- Rugged high current multi-pin Speakon connectors
- Enclosure design also allows both vertical and horizontal driver alignments
- Digital processor contains the very best AD/DA converters and analog components available today
- Integrated DSP with user definable room compensation equalization and delay
- AES Digital and analog inputs
Guzauski-Swist GS3A Monitoring System Specifications
- Type: Active 3-Way 2 Cubic Foot Sealed Enclosure
- Drivers:
- 12″ Woofer 1000 Watts @ 4 Ohms
- 3″ Dome Mid-range 200 Watts @ 6 Ohms
- 1″ Dome Tweeter 350 Watts @ 8 Ohms
- Power: 3.5 Kilowatts of Amplification
- Frequency Response: 28Hz-20kHz (+/- 2dB)
- Crossover Points: 3kHz and 380Hz @ 24dB/Octave
- Inputs: Analog and Digital (AES)
- Size: 14.5″H x 23.5″W x 15.5″D
- Weight: 70 lbs ea
- Amp Chassis: 2U 18″ Deep
- Processor Chassis: 1U 14″ Deep
- Current Draw: 12 Amps
Guzauski-Swist GS3A Monitoring System Includes
- 1x GS3A Monitor (Left)
- 1x GS3A Monitor (Right)
- 2x GSA3i Amplifier
- 2x Speak-On Cables
Videos Hide Videos Show Videos
No review yet, Be first to Write a Review